Precision shafts for industrial applications

Benefits

Exceptionally high degree of stability
Designed for extended service life
Variable standard designs and materials

Features

High precision grind shafts
Available in standard shafting designs
Large range of several steel grades

Ewellix precision shafts are induction hardened and have an outside diameter of class h6 or h7 tolerance. They are available in various materials and standard design options. The design options are visible under types from ESSC 1 to 8.

Technical Data

Overview

Diameter range	from 3 to 80 mm
Length in one piece	200 mm to 6 200 mm
Shaft types and steel grades	Standard steel: LJM EN 1.1213 / AISI 1055 Stainless steel: LJMR EN 1.4112 / AISI 440B Stainless steel: LJMS EN 1.4034 / AISI 440B Chrome plated: LJMH EN 1.1213 / AISI 1055 Hollow shaft: LJT EN 1.3505 / AISI 5210

Types

ESSC1

ESSC1

Shaft cut to length and deburred
Length tolerance ±1,5 mm

ESSC2

ESSC2

Shaft cut to length with chamfer
Chamfer with r value of minimum
1 mm
Length tolerance ±1,5 mm

ESSC3

ESSC3

Shaft cut to length with chamfer 25°
With machined front surface 90°
Length tolerance ±0,1 mm up to 3 m length
Chamfer with r value

ESSC4

ESSC4

Shaft cut to length with chamfer 25°
With machined front surface 90°
Length tolerance ±0,1 mm up to
3 m length
Chamfer with r value
With one axial thread

ESSC5

ESSC5

Shaft cut to length with chamfer 25°
With machined front surface 90°
Length tolerance ±0,1 mm up to
3 m length
Chamfer with r
With two axial threads

ESSC6

ESSC6

Shaft cut to length with chamfer
Chamfer with r value of minimum
1 mm
Length tolerance ±1,5 mm
Shaft with radial threads for LRCB shaft supports
First radial thread position at
Jx = J/2

ESSC7

ESSC7

Shaft cut to length with chamfer
Chamfer with r value of minimum
1 mm
Length tolerance ±1,5 mm
Shaft with radial threads
Dimension J and Jx as specified in customer's drawing

ESSC8

ESSC8

Shaft cut to length with chamfer
Chamfer with r value of minimum
1 mm
Length tolerance ±1,5 mm
Shaft with radial threads for LRCB shaft supports
First radial thread position at
Jx = J/2
Shaft fully supported and mounted with LRCB shaft supports

2D / 3D

For product orders, please refer to our catalogue pages where the ordering keys are indicated. Please do not use the ordering keys generated here as they may be incomplete.

Publications