Single linear units

Benefits:
  • Quick and easy installation
  • Flexibility in design any kind of linear slide
  • Low friction energy saving motion solution
Features:
  • Lightweight casted design
  • Wide range of unit designs including flanged ones
  • Factory pre-lubricated and ready for use

To support easy designs of linear slides in any kind of width and length, single units are the best fit. The wide range of single linear bearing units for the compact version (ISO series 1) and the standard version (ISO series 3) allow flexibility and modularity in design.

Product tab contents

Technical Data

Sub tab

Overview
Speed

up to 5 m/s

Acceleration

up to 100 m/s2

Operating temperature

-20 to +80 °C

Diameter range

from 8 to 80 mm

Dynamic load rating C

up to 37 500 N

Static load rating Co

up to 32 000 N

Types

LUHR

Compact unit in closed design with self-holding LBBR bearing (ISO series 1) from 12 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

LUJR

Compact unit in closed design with LBBR bearing and external seals (ISO series 1) from 12 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

LUCD

Standard unit in lightweight closed design with self-aligning LBCD bearing (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded or stainless steel.

LUCR

Standard unit in lightweight closed design with rigid LBCR bearing (ISO series 3) from 8 to 80 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

LUCE

Standard unit in lightweight slotted design with self-aligning LBCD bearing (ISO series 3) from 12 to 50 mm shaft size for adjustable clearance. Variants: sealed, shielded or stainless steel.

LUCS

Standard unit in lightweight slotted design with rigid LBCR bearing (ISO series 3) from 8 to 80 mm shaft size for adjustable clearance. Variants: sealed, shielded or stainless steel.

LUCF

Standard unit in lightweight open design with self-aligning LBCF bearing (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded or stainless steel.

LUCT

Standard unit in lightweight open design with rigid LBCT bearing (ISO series 3) from 8 to 80 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

LUCT..BH

Standard unit in lightweight heavy duty open design with rigid LBHT bearing (ISO series 3) from 20 to 50 mm shaft size. Variants: sealed, shielded or stainless steel.

LUND

Standard unit in closed design with self-aligning LBCD bearing (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded or stainless steel.

LUNR

Standard unit in closed design with rigid LBCR bearing (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

LUNE

Standard unit in slotted design with self-aligning LBCD bearing (ISO series 3) from 12 to 50 mm shaft size for adjustable clearance. Variants: sealed, shielded or stainless steel.

LUNS

Standard unit in slotted design with rigid LBCR bearing (ISO series 3) from 12 to 50 mm shaft size for adjustable clearance. Variants: sealed, shielded or stainless steel.

LUNF

Standard unit in open design with self-aligning LBCF bearing (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded or stainless steel.

LUNT

Standard unit in open design with rigid LBCT bearing (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing

LVCD

Standard unit in flanged design with self-aligning LBCD bearing (ISO series 3) from 12 to 80 mm shaft size. Variants: sealed, shielded or stainless steel.

LVCR

Standard unit in flanged design with rigid LBCr bearing (ISO series 3) from 12 to 80 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

2D / 3D

Warning Message

For product orders, please refer to our catalogue pages where the ordering keys are indicated. Please do not use the ordering keys generated here as they may be incomplete.

Publications
IL-06013/6-EN-September 2022 Linear bearings units and shafts
IL-06015-US-September 2020 Inch linear ball bearings
Available only for USA market
Linear ball bearings specification sheet
Please download first before filling
EL-04005-US-March 2020 Inch linear ball bearings
Available only for USA market
EL-04010-EN-April 2022 WhyEwellix-LBB
Product selectors

Product selection

Product selection

Cross-reference

Cross-reference

Product search

Product search

Need more
information?
Ask our experts.

X