Skip to main content

Tandem–quadro linear units

Benefits

  • Fastest way to a linear slide design
  • Ready to use without extra efforts
  • Low friction energy saving slide solution

Features

  • Solutions in compact and standard range
  • Available with double lip low friction seals
  • Factory pre-lubricated and ready for use

Tandem and specific quadro units are the easiest way to build up a linear slide. Only a flat surface is needed for the installation all other tolerance are already incorporated into the Quadro design. Please contact us for more information about our linear bearings product range!

      Speed

      up to 5 m/s

      Acceleration

      up to 100 m/s2

      Operating temperature

      -20 to +80 °C

      Diameter range

      from 8 to 50 mm

      Dynamic load rating C

      up to 35 500 N

      Static load rating Co

      up to 49 000 N

      LTBR

      LTBR

      Compact tandem unit in closed design with two self-holding LBBR bearings (ISO series 1) from 12 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing .

      LTDR

      LTDR

      Compact duo unit in closed design with two LBBR bearings (ISO series 1) from 12 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

      LQBR

      LQBR

      Compact quadro unit in closed design with four LBBR bearings (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

      LTCD

      LTCD

      Standard tandem unit in closed design with two self aligning LBCD bearings (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded or stainless steel.

      LTCR

      LTCR

      Standard tandem unit in closed design with two rigid LBCR bearings (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

      LTCF

      LTCF

      Standard tandem unit in open design with two self-aligning LBCF bearings (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded or stainless steel.

      LTCT

      LTCT

      Standard tandem unit in open design with two rigid LBCT bearings (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

      LQCD

      LQCD

      Standard quadro unit in closed design with four self-aligning LBCD bearings (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded or stainless steel.

      LQCR

      LQCR

      Standard quadro unit in closed design with four rigid LBCR bearings (ISO series 3) from 8 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

      LQCF

      LQCF

      Standard quadro unit in open design with four self-aligning LBCF bearings (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded or stainless steel.

      LQCT

      LQCT

      Standard quadro unit in open design with four rigid LBCT bearings (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

      For product orders, please refer to our catalogue pages where the ordering keys are indicated. Please do not use the ordering keys generated here as they may be incomplete.
      IL-06013/7-EN-January 2023 Linear bearings units and shafts
      IL-06015-US-September 2020 Inch linear ball bearings

      Available only for USA market

      EL-04005-US-March 2020 Inch linear ball bearings

      Available only for USA market

      EL-04010/1-EN-May 2023 WhyEwellix-LBB
      VP-10006-EN-Linear ball bearings specification sheet

      Need more
      information?
      Ask our experts.

      I agree to Ewellix Terms & Conditions and Privacy Policy